Question on pH and KH.

Slippertalk Orchid Forum

Help Support Slippertalk Orchid Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Paph_Person

Member
Joined
Aug 9, 2024
Messages
23
Reaction score
24
Location
Asia
We've all known the importance of adjusting pH when watering our orchids. However, the topic of water kH (carbonate hardness) often gets overlooked. Recently, I had a conversation with Ray, who pointed out something interesting: the pH of the water doesn’t directly correspond to the pH in the potting media. In fact, the media pH can vary significantly regardless of the water's pH.

This raises an important question: what should the ideal kH of our watering water be? Especially ones whoo use RO water. Since kH acts as a buffer, it helps stabilize pH and prevents sudden fluctuations. Getting this right seems crucial for maintaining a stable environment for our orchids.

I’d love to hear your insights on the ideal kH levels.
Thanks.
 
I agree that potting media has biggest effect on root zone pH. Fertilizer solution pH is very important but if the potting mix is way out of range then it is hard to make an adjustment with just the water you pour through. I have 130ppm well water with 25ppm caco3 alkalinity. The pH is 7 so with fertilizer added closer to 6.4, 6.3. With the bark potting mix I use I think this gets pH in the right range. I flush with RO every 4th watering. I think a lot of people grow very nice paphs mixing fertilizer with city water or other alkaline hard water because their bark mix is acidic and fertilizers with some ammonium or urea tend to lower pH in fertilizer solution and in the root zone. Hence the end result is pH at the roots around 5.5 - 6.5
 
Alkalinity or KH targets will vary based upon the fertilizer used.

As a plant takes up ammonium ions, it secretes compensatory H+ ions, which acidify the substrate. Urea is also a source of ammonium ions. A plant taking up nitrates secrete OH- or HCO- ions, which raise the pH of the substrate.

Since KH is really just a measure of buffering, you need to figure out what CaCO3 content would provide that for your choice of fertilizer.

Bill Argo, the PhD for formulated the so-called “MSU” fertilizers and both K-Lite versions for me, wrote a series of articles on plant nutrition several years ago. They are worth a read (Primer on Plant Nutrition), but the 3rd installment addresses this directly.
 

Latest posts

Back
Top